NSI Photocontrol, Button, Series: 3000, 120 VAC, 50/60 Hz Frequency, 2000 W Tungsten, 1200 VA Ballast, 1NC-SPST Contact Form, 2 min Timing, 16 AWG Wire, Cadmium Sulfide Cell Sensor, 1 to 5 FC (ON)/3 to 15 FC (OFF) Ratio Sensitivity, Environmental Conditions: -40 to 140 deg F Operating Temperature, Flush Mounting, Lexan, 2 in H x 1 in W x 1-1/2 in D Dimensions
cULus Listed|ANSI Specified|UL 773A
Conformal coated cadmium sulphide photocell resists effects of moisture and airborne contaminants|Photocell responds to the light spectrum near to that of a human eye|Delay of up to two minutes to prevent false switching due to light from passing vehicles, lightning and more|Control housing is weather resistant molded Lexan with ultrasonically welded seams|Flush mounting through 11/16 in hole in post lantern or lighting fixture, 3/8 in NPT, stem 3/4 in long|Works with screw base CFL|On and Off time delay|Cadmium sulphide, conformal coated 1/2 in diameter cell|Three color coded, minimum 9 in wire leads, 16 AWG, rated for 105 deg C lead wires|Averages under 1 W power consumption|On fail mode
Ballast Load
1200
Contact Form
1NC-SPST
Dimensions
2 in H x 1 in W x 1-1/2 in D
Environmental Conditions
-40 to 140 deg F Operating Temperature
Frequency Rating
50/60
Material
Lexan
Mounting Type
Flush
Sensitivity
1 to 5 FC (ON)/3 to 15 FC (OFF) Ratio
Sensor Type
Cadmium Sulfide Cell
Series
3000
Timing Range
2
Tungsten Rating
2000
Type
Button
Voltage Rating
120
Wire Size
16
Brand
NSI
Manufacturer
NSi Industries